Tassie time

Got a thin skin? Then look elsewhere. Post a link to an image that you've made, and invite others to offer their critiques. Honesty is encouraged, but please be positive in your constructive criticism. Flaming and just plain nastiness will not be tolerated. Please note that this is not an area for you to showcase your images, nor is this a place for you to show-off where you have been. This is an area for you to post images so that you may share with us a technique that you have mastered, or are trying to master. Typically, no more than about four images should be posted in any one post or thread, and the maximum size of any side of any image should not exceed 950 px.

Moderators: Greg B, Nnnnsic, Geoff, Glen, gstark, Moderators

Forum rules
Please note that image critiquing is a matter of give and take: if you post images for critique, and you then expect to receive criticism, then it is also reasonable, fair and appropriate that, in return, you post your critique of the images of other members here as a matter of courtesy. So please do offer your critique of the images of others; your opinion is important, and will help everyone here enjoy their visit to far greater extent.

Also please note that, unless you state something to the contrary, other members might attempt to repost your image with their own post processing applied. We see this as an acceptable form of critique, but should you prefer that others not modify your work, this is perfectly ok, and you should state this, either within your post, or within your signature.

Images posted here should conform with the general forum guidelines. Image sizes should not exceed 950 pixels along the largest side (height or width) and typically no more than four images per post or thread.

Please also ensure that you have a meaningful location included in your profile. Please refer to the FAQ for details of what "meaningful" is.

Tassie time

Postby ozimax on Sat Nov 07, 2015 9:49 pm

I had a few days in Tassie this week, up to and including today.

Overlooking Mt Roland
ImageRoland1 by Ozimax, on Flickr

Red dirt crops (oversaturated on purpose)
ImageDevonport4 by Ozimax, on Flickr

Cradle Mountain as majestic as ever
ImageCradle2 by Ozimax, on Flickr

Into the night
ImageDevonport1 by Ozimax, on Flickr
President, A.A.A.A.A (Australian Association Against Acronym Abuse)
Canon EOS R6, RF 24-105 F4, RF 70-200 F4, RF 35mm F1.8, RF 16mm F2.8
"And ye shall know the truth, and the truth shall make you free." (John 8:32)
User avatar
ozimax
Senior Member
 
Posts: 5284
Joined: Wed Jan 05, 2005 11:58 am
Location: Coffs Harbour, NSW

Re: Tassie time

Postby !~DeViNe~DaRkNeSs~! on Sun Nov 08, 2015 1:56 am

I don't have enough fingers to point at all the things i like about these pics
Canon EOS 40D
Canon EOS 400D
50mm 1.8 EF
User avatar
!~DeViNe~DaRkNeSs~!
Member
 
Posts: 437
Joined: Mon Dec 18, 2006 9:19 am
Location: Essendon - MELBOURNE

Re: Tassie time

Postby zafra52 on Sun Nov 08, 2015 10:56 am

I don't have enough fingers to point at all the things i like about these pics


I quite agree; I like all of them.
User avatar
zafra52
Senior Member
 
Posts: 4792
Joined: Thu Dec 01, 2005 10:22 pm
Location: Brisbane

Re: Tassie time

Postby Matt. K on Sun Nov 08, 2015 2:36 pm

Great shots! All have the essentials for landscapes, foreground, middle ground and back ground. If I might make 1 slight negative comment....I think the images have been over sharpened and this gives them a slightly unnatural look.
Regards

Matt. K
User avatar
Matt. K
Former Outstanding Member Of The Year and KM
 
Posts: 9981
Joined: Mon Sep 06, 2004 7:12 pm
Location: North Nowra

Re: Tassie time

Postby bigsarg7 on Sun Nov 08, 2015 4:00 pm

Great shots, Im guessing you packed the fuji gear to travel with? They look fantastic, makes me actually want to go visit there again!! (lasted 24hrs last time, might have to make it a longer stay and explore more next time).
2 x Fuji xt1,vg-xt1 grip, Fujinon xf 18-55mm 2.8-4, Fujinon xf 14mm, Fujinon 56mm 1.2.
User avatar
bigsarg7
Senior Member
 
Posts: 667
Joined: Tue Oct 21, 2008 2:11 pm
Location: Goulburn Valley (Victoria, Australia)

Re: Tassie time

Postby gstark on Mon Nov 09, 2015 6:19 am

Matt. K wrote:...I think the images have been over sharpened and this gives them a slightly unnatural look.


It's Tassie, so looking unnatural should be ... natural.

Great shots, and I particularly like the various colours in the second.
g.
Gary Stark
Nikon, Canon, Bronica .... stuff
The people who want English to be the official language of the United States are uncomfortable with their leaders being fluent in it - US Pres. Bartlet
User avatar
gstark
Site Admin
 
Posts: 22899
Joined: Thu Aug 05, 2004 11:41 pm
Location: Bondi, NSW

Re: Tassie time

Postby PiroStitch on Mon Nov 09, 2015 1:30 pm

Love the colours in the second.

Haven't had a chance to make my way down to Tassie and these shots are selling me on the idea of it!
Hassy, Leica, Nikon, iPhone
Come follow the rabbit hole...
User avatar
PiroStitch
Senior Member
 
Posts: 4669
Joined: Sat Mar 05, 2005 1:08 am
Location: Hong Kong

Re: Tassie time

Postby biggerry on Tue Nov 10, 2015 10:32 pm

I like the second image Oziman, repetitive fields always catch me in :)

I agree with Matt, they are all over sharpened, this is exacerbated by the forum resize, however viewing on flickr shows they have been pushed a bit far.

I like your low viewpoint on Dove lake too :)
gerry's photography journey
No amount of processing will fix bad composition - trust me i have tried.
User avatar
biggerry
Senior Member
 
Posts: 5930
Joined: Tue May 13, 2008 12:40 am
Location: Under the flight path, Newtown, Sydney

Re: Tassie time

Postby ozimax on Wed Nov 11, 2015 8:40 am

Thanks all for the comments. I do agree that they're most probably over sharpened to a fair degree but to be honest the processing was done on-the-fly . If I was printing these large I would take more time to do the saturation/sharpening etc. There's just not much time (or internet) while on the road. Taste is a nice place to visit. This week I am not exactly working but taking care of my elderly parents on this trip, which actually makes for harder work than a normal week but hey, that's life. Off to Port Arthur today so should be interesting.
President, A.A.A.A.A (Australian Association Against Acronym Abuse)
Canon EOS R6, RF 24-105 F4, RF 70-200 F4, RF 35mm F1.8, RF 16mm F2.8
"And ye shall know the truth, and the truth shall make you free." (John 8:32)
User avatar
ozimax
Senior Member
 
Posts: 5284
Joined: Wed Jan 05, 2005 11:58 am
Location: Coffs Harbour, NSW

Re: Tassie time

Postby gstark on Wed Nov 11, 2015 9:38 am

ozimax wrote:Off to Port Arthur today so should be interesting.


Please do take care there.

I lost a dear friend, Ray Sharp, in the Port Arthur massacre. Please pay my respects.
g.
Gary Stark
Nikon, Canon, Bronica .... stuff
The people who want English to be the official language of the United States are uncomfortable with their leaders being fluent in it - US Pres. Bartlet
User avatar
gstark
Site Admin
 
Posts: 22899
Joined: Thu Aug 05, 2004 11:41 pm
Location: Bondi, NSW

Re: Tassie time

Postby ozimax on Wed Nov 11, 2015 6:17 pm

gstark wrote:
ozimax wrote:Off to Port Arthur today so should be interesting.


Please do take care there.

I lost a dear friend, Ray Sharp, in the Port Arthur massacre. Please pay my respects.


Just home from Pt Arthur Gary and I've only read your post now. I did spend a moment reflecting at the memorial. I remember years ago visiting the cafe which is now empty. I'm sorry to hear that your friend died in the tragedy. We enjoyed Pt Arthur but I must admit it was a little strange being there this time. The staff seemed very understanding and professional when mentioning 1996.

It seemed an appropriate day too, being 11/11, and as usual I did also get to spend a minute's silence, (alone) on this special day.
President, A.A.A.A.A (Australian Association Against Acronym Abuse)
Canon EOS R6, RF 24-105 F4, RF 70-200 F4, RF 35mm F1.8, RF 16mm F2.8
"And ye shall know the truth, and the truth shall make you free." (John 8:32)
User avatar
ozimax
Senior Member
 
Posts: 5284
Joined: Wed Jan 05, 2005 11:58 am
Location: Coffs Harbour, NSW

Re: Tassie time

Postby gstark on Thu Nov 12, 2015 6:46 am

ozimax wrote:It seemed an appropriate day too, being 11/11, and as usual I did also get to spend a minute's silence, (alone) on this special day.


Indeed.

I've only been to Tassie once; 1973, for my honeymoon. Can't remember where my then wife went ... :)

I need to go again (and to Adelaide) ....
g.
Gary Stark
Nikon, Canon, Bronica .... stuff
The people who want English to be the official language of the United States are uncomfortable with their leaders being fluent in it - US Pres. Bartlet
User avatar
gstark
Site Admin
 
Posts: 22899
Joined: Thu Aug 05, 2004 11:41 pm
Location: Bondi, NSW

Re: Tassie time

Postby ozimax on Thu Nov 12, 2015 8:46 am

gstark wrote:
ozimax wrote:It seemed an appropriate day too, being 11/11, and as usual I did also get to spend a minute's silence, (alone) on this special day.


Indeed.

I've only been to Tassie once; 1973, for my honeymoon. Can't remember where my then wife went ... :)

I need to go again (and to Adelaide) ....


I took Robyn on the Overland Track (Cradle Mt to Lake St Clair) on our 1st anniversary way back in January 1984. We slogged through 5 days of mud. Lost her a couple of times but eventually found her again. Actually I think she tried to lose me a few times for taking her there, but I always kept coming back...

Tassie is a nice place, not quite as majestic as NZ but still beautiful, especially the alpine regions. Unfortunately for many it takes a lot of walking to get to the very best spots and it's also a very expensive place to visit.
President, A.A.A.A.A (Australian Association Against Acronym Abuse)
Canon EOS R6, RF 24-105 F4, RF 70-200 F4, RF 35mm F1.8, RF 16mm F2.8
"And ye shall know the truth, and the truth shall make you free." (John 8:32)
User avatar
ozimax
Senior Member
 
Posts: 5284
Joined: Wed Jan 05, 2005 11:58 am
Location: Coffs Harbour, NSW


Return to Image Reviews and Critiques

Who is online

Users browsing this forum: No registered users and 33 guests

cron