4 the elec techs - radio

Those nice to know things about your DSLR will be found here. How to do this, and why you probably should not do that.

Moderators: Greg B, Nnnnsic, Geoff, Glen, gstark, Moderators

Forum rules
Please ensure that you have a meaningful location included in your profile. Please refer to the FAQ for details of what "meaningful" is. Please also check the portal page for more information on this.

4 the elec techs - radio

Postby Oz_Beachside on Sun Dec 17, 2006 10:17 pm

Hello,

Trying to rack my brain over electrical theory...

Is there any reason that a set of Bowens Pulsar triggers ordered from BH (USA) would not work here? like these http://www.bhphotovideo.com/bnh/controller/home?A=details&Q=&is=REG&O=productlist&sku=352553
They are battery operated, if I only plan to use between each other, and not locally purcahsed ones, I think it would be fine. The USD is so low it just makes more sense to by US...

Any electronic tech minds in here know otherwise?

Or, anyone using bowens in here?
User avatar
Oz_Beachside
Senior Member
 
Posts: 2227
Joined: Thu May 25, 2006 11:31 pm
Location: Black Rock, Victoria. D200

Postby rooboy on Sun Dec 17, 2006 10:38 pm

What distances do you need to use them across? For short range, optical triggers should be fine. For longer distances, the Pocket Wizards aren't much more expensive and are supposed to be excellent.
So join in the chorus, and sing it one and all!
User avatar
rooboy
Member
 
Posts: 479
Joined: Wed Nov 02, 2005 9:14 am
Location: Maroubra, Sydney

Postby Oz_Beachside on Sun Dec 17, 2006 10:41 pm

for say up to 20-30m.

need radio, to shoot around corners...

I like the Pocket Wizards for rep, and sekonic compatibility, but the bowens are much smaller on camera, and thats my decision maker - but not a solid one...
User avatar
Oz_Beachside
Senior Member
 
Posts: 2227
Joined: Thu May 25, 2006 11:31 pm
Location: Black Rock, Victoria. D200

Postby wendellt on Mon Dec 18, 2006 12:12 am

hi

you could always use these cheaper things

http://cgi.ebay.com.au/FM-Wireless-Radi ... dZViewItem

i have used one on a Hensel and Hyundai Photonics strobe set and they work even around corners assuming your in a studio environment with walls the radio signal can bounce off

they look cheap but they do the job

after you have tried these out you can move to the more expensive triggers if needed
User avatar
wendellt
Outstanding Member of the year (Don't try this at home.)
 
Posts: 4078
Joined: Sun Feb 20, 2005 10:04 am
Location: Dilettante Outside the City Walls, Sydney

Postby Antsl on Mon Dec 18, 2006 12:27 am

Hi Wendel,

I would suggest those units you mention above if it wasn't for the fact that Bruce is using the Bowens location kit that has a battery pack option. That radio slave would only work in a studio environment where you have 240volt power supply.

My advice would be to go with the Bowens slaves from B+H... I think they might be on a different frequency to the local units however given that they are battery powered there should be no problem with voltage compatibility.

Have fun with them!
Ants
User avatar
Antsl
Senior Member
 
Posts: 678
Joined: Sun Jun 19, 2005 1:22 am
Location: North Melbourne, Victoria!

Postby wendellt on Mon Dec 18, 2006 12:42 am

good evening Anthony

thanks for sorting that out

i do remember getting intermitent results outdoors with a similar cheapo trigger with a hensel porty pack
User avatar
wendellt
Outstanding Member of the year (Don't try this at home.)
 
Posts: 4078
Joined: Sun Feb 20, 2005 10:04 am
Location: Dilettante Outside the City Walls, Sydney

Postby Oz_Beachside on Mon Dec 18, 2006 12:43 pm

order placed, thanks gents. now patiently wait for them to arrive.

Hopefully this will reduce missfires significantly... faulty equipment makes me look foolish... or even more foolish than I am... :D
User avatar
Oz_Beachside
Senior Member
 
Posts: 2227
Joined: Thu May 25, 2006 11:31 pm
Location: Black Rock, Victoria. D200


Return to Tips and tricks

Who is online

Users browsing this forum: No registered users and 39 guests