*EDIT: Better version below:*
Bloody cone!

Ferrari motokhana from TasmaniaModerators: Greg B, Nnnnsic, Geoff, Glen, gstark, Moderators
Forum rules
Please note that image critiquing is a matter of give and take: if you post images for critique, and you then expect to receive criticism, then it is also reasonable, fair and appropriate that, in return, you post your critique of the images of other members here as a matter of courtesy. So please do offer your critique of the images of others; your opinion is important, and will help everyone here enjoy their visit to far greater extent. Also please note that, unless you state something to the contrary, other members might attempt to repost your image with their own post processing applied. We see this as an acceptable form of critique, but should you prefer that others not modify your work, this is perfectly ok, and you should state this, either within your post, or within your signature. Images posted here should conform with the general forum guidelines. Image sizes should not exceed 950 pixels along the largest side (height or width) and typically no more than four images per post or thread. Please also ensure that you have a meaningful location included in your profile. Please refer to the FAQ for details of what "meaningful" is.
Previous topic • Next topic
18 posts
• Page 1 of 1
Ferrari motokhana from TasmaniaDid some photography for these guys while they were visiting Tassie.
*EDIT: Better version below:* Bloody cone! ![]() Last edited by Rainey on Mon Sep 18, 2006 6:09 pm, edited 1 time in total.
Well done, beautiful shot!
the Ferrari Red colour really stands out, my only criticism is that perhaps you should get rid of the cone in the corner. D70s/D200; Tokina 16-50mm 2.8; 18-70DX ; 50mm 1.8 ; 80-200mm 2.8D ; SB600 + Stofen Omini Bouncer
The bloke looks a bit like Joet, or is that my eyes playing tricks on me.
Good job cloning out the cone, I wouldn't know it was there had I not already seen the original.
He was like a big kid out there! I was even lucky enough for him to take me for a ride in it, boy was that one of the best experiences of my life! Thanks once again for the comments. You can view the rest from my gallery on photobucket here:
http://s84.photobucket.com/albums/k12/rainey06au/dslr/ferrariclub/ http://s84.photobucket.com/albums/k12/rainey06au/dslr/ferrariclub/motokhana/ Such a surreal feeling being around 40 Ferrari's, in Hobart of all places!
Jberth, I think I had to dry my chin for hours after that day!
![]() I've been playing around with a couple of others in photoshop and came up with this: ![]() ![]() The last image, although pretty hard on the eyes was a clone of two photos, the base photo was completely out of focus so I decided to add that motion blur and then clone the headlight from a better shot into that picture for sharpness. I was pretty happy with it considering the original was basically a loss.
I'll bet the owner will pay top $ for a poster of the second last image... the last one has so much impact.. I think I got a headache from it! lol
great work! Mark Greenmantle
http://www.elffinarts.com / mark at elffinarts dot com D70, 50mm/F1.8, kit lens, 80-200mm/F2.8, 35-70mm/f2.8, two 160w/sec slave strobes, sb600, "taller than me" astronomical tripod "can I have that step ladder please"
Hi guys, just adding a spin to this thread.
One of my work collegues has a 16yo son who is in Victoria for chemotherapy as he has recently been diagnosed with cancer, obviously this is a very hard time for his family and the boy. So I've decided to produce an enlargement of the image below (my best shot) and have it framed for him to take over for his son when he goes back late next week. The boy is right into cars, so his father told me he would absolutely love it and it would brighten up the treatment room he is staying in. I need framing ideas, I'm going to get it professional framed, however I have no idea what style would suit this type of image: ![]() Can anyone help me come up with some ideas that would make the shot look absolutely fantastic on the wall?? Cheers, Nick
Hi Nick, a guy I work with has started framing his large pics sandwiched between 2 sheets of perspex, with a matt to stop the pic touching the front sheet. He drills 4 holes in the perspex and uses small bolts to hold the whole sandwich together. They look very effective, and in fact he just won a photo comp down here in Hobart with one of them. You end up with the photo standing on it's own and not being swamped by the frame. He's on leave at the moment so I can't find out where he gets his materials from, but in Hobart somewhere. I know he said it takes him a max of 2 hours to frame an image. You'd be able to get the perspex in Hobart somewhere if you wanted to give this a go. I think he goes to Artery to get his matts.
Cheers John D3, D300, 14-24/2.8, 24-70/2.8, 85/1.4, 80-400VR, 18-200VR, 105/2.8 VR macro, Sigma 150/2.8 macro
http://www.johndarguephotography.com/
Thanks for the info John! I might pop in to Artery tomorrow and see if I can find anything to use. I'm just trying to picture the method in my head. Do you know if he uses anything to close off the edges of the perspex where they join or does he just keep the sandwich look to it?
Just keeps the sandwich look. If you get a chance tomorrow or tonight, check out "The Not Yet Famous" exhibition at Long Gallery in Salamanca (last day tomorrow). Owen has 3 pieces in the exhibition framed this way. And one of them won. That's O1 from around here but you didn't hear it from me.
![]() Cheers John D3, D300, 14-24/2.8, 24-70/2.8, 85/1.4, 80-400VR, 18-200VR, 105/2.8 VR macro, Sigma 150/2.8 macro
http://www.johndarguephotography.com/
Previous topic • Next topic
18 posts
• Page 1 of 1
|