DIY LenshoodsModerators: Greg B, Nnnnsic, Geoff, Glen, gstark, Moderators
Forum rules
Please ensure that you have a meaningful location included in your profile. Please refer to the FAQ for details of what "meaningful" is. Please also check the portal page for more information on this.
Previous topic • Next topic
11 posts
• Page 1 of 1
DIY LenshoodsDid this site post before? I found it funny. Making hoods for yourself.
http://www.lenshoods.co.uk/ Nikon D70s + Nikkor AF 28-105D+ AFS 70-300 VR + AF 50 f/1.8 D + Tokina 12-24 f/4 + DX 10.5 Fisheye+SB800
White lens hoods!
I think that would sort of defeat the purpose a bit - unless you painted them matt black on the inside ![]()
Or made them out of black neoprene (wetsuit material).
You can buy spray on flocking, or just use black spray paint. Unfortunately putting black paper in the laser printer doesn't work very well. I think there's room go go wild with the black velvet (try explaining that to your camera widow... "I've started going through the sale bins in fabric shops because I found this site on the internet..."). http://www.moz.net.nz
have bicycle, will go to Critical Mass
I like the idea of the neoprene as it absorbs minor shocks but is sturdy yet flexible, good for pushing up against aquarium or zoo enclosure glass.
Is this true, and why is this the case ? If so what is the correct way to use a petal shaped hood ?
They try to match the actualy FoV of the lens, so you get shading right up to the edge of the frame. This can mean that you get better shading of the front element, so the hood works better. But since many of us shoot with full frame lenses on crop cameras it's a bit academic anyway, since there's room for more hood than most of us carry. Some Canon users buy the "next size up" hood to compensate if they can find one that fits (putting the hood for a 35mm lens on a 24mm lens, for example). More important on short lenses, since the hood on a long lens is usually constrained by physical size rather than FoV. few people want a metre-long petal hood on their 600mm lens... http://www.moz.net.nz
have bicycle, will go to Critical Mass
Not just Canon users. With film, I used the HN-1 hood with the 24 f/2.8, the HN-2 with the 28 f/2.8 and the HN-3 with the 35 f/1.4, just as Nikon intended. Nowadays, I use the HN-2 on the 24, the HN-3 on the 28 and the HS-6 (made for the 50 f/2) on the 35. As expected, I don't get vignetting with those. Cheers Steffen.
Re: DIY Lenshoodsif only i can build a camera out of paper too.....
Previous topic • Next topic
11 posts
• Page 1 of 1
Who is onlineUsers browsing this forum: No registered users and 5 guests |