Original

False Colour

Infrared FunModerators: Greg B, Nnnnsic, Geoff, Glen, gstark, Moderators
Forum rules
Please note that image critiquing is a matter of give and take: if you post images for critique, and you then expect to receive criticism, then it is also reasonable, fair and appropriate that, in return, you post your critique of the images of other members here as a matter of courtesy. So please do offer your critique of the images of others; your opinion is important, and will help everyone here enjoy their visit to far greater extent. Also please note that, unless you state something to the contrary, other members might attempt to repost your image with their own post processing applied. We see this as an acceptable form of critique, but should you prefer that others not modify your work, this is perfectly ok, and you should state this, either within your post, or within your signature. Images posted here should conform with the general forum guidelines. Image sizes should not exceed 950 pixels along the largest side (height or width) and typically no more than four images per post or thread. Please also ensure that you have a meaningful location included in your profile. Please refer to the FAQ for details of what "meaningful" is.
Previous topic • Next topic
5 posts
• Page 1 of 1
Infrared FunPicked up a hoya r72 the other day. Haven't had a chance to give it a real play. Here is a quick shot outside my front door this morning. Filter was applied on a 50mm 1.7 Pentax M. Hard to compose and focus manually when no visible light comes through the viewfinder!
Original ![]() False Colour ![]()
Not bad!
Did you shoot in RAW? Your processed version has quite a bit of noise in the sky. You might already be doing it, but you'll get better quality by shooting in RAW, adjusting the WB to an extreme where the tree is fairly neutral, and THEN applying false-colour actions. I can get an interesting image by processing your red JPEG, but I'm sure it can do better in terms of quality.
Cheers! And yup, I'm shooting raw, only way to go really when doing IR
![]() As for the noise, I added some film grain in to give the photo a bit of a weathered feel. I'll post a copy without noise when I get home. Be interesting to try the conversion again with WB adjustments.
Have you tried autofocus with the camera? It actual can autofocus, but its you that dont know where it focused on to
![]()
The lens I used was manual so no autofocus. However the viewfinder has a focus indicator, I had it wide open @ 1.7, dialed in the approx distance on the focus ring, then finetuned until the focus indicator lit up and hoped for the best! Shooting on a Pentax ist dl. BTW: I also applied a sepia tone to the photo.
Previous topic • Next topic
5 posts
• Page 1 of 1
|